Forum Logo Rc Vehicles Forum

RC helicopters, FPV, Multirotors, RC boats and RC cars hobby - RC forums

Hello Everybody,

We are looking 2 admin for 2 forum :

One for the Aircraft Shed (All about aircrafts)
One for the Boats Harbor (Rc race boats and sailboats)
If you say YES i can do it , you can leave a message in the admin dialog box
 
Discuss electric RC off-road, buggies & trucks here. Also discuss brushless motors, speed controllers aka ESC's, brushed motors, etc
User avatar
by: ozgurcoteli
#79
RC10B5M Team Kit

image.jpeg


The RC10B5M has all the makings of a champion, and with the proven performance from Team Associated, you're assured of support no matter where you go. If high-speed, high-grip tracks are your game, the B5M has what it takes to give you the winning advantage.
This vehicle needs extra parts to make it operational. Click on the SPECS tab above to see what extra equipment you'll need to make the vehicle operational, such as motor and battery pack.
RC10B5M Team Kit shown on these pages equipped with items NOT included in kit: Reedy motor, battery, ESC, servo, XP receiver, wheels, tires, and pinion gear. Body comes clear. Assembly and painting required.
Both the B5 and B5M won the 2014 RC Car Action Readers' Choice for Electric Buggy and Editors' Choice for Car of the Year!
Features
Narrowed hard anodized aluminum chassis with centralized mass and mid-motor position for improved handling on high grip off road tracks
Chassis accepts R.O.A.R.-approved 2S saddle packs and 2S short packs using the additional foam insert
Factory Team V2 12mm Big Bore threaded aluminum shocks with 3mm shock shafts and updated O-rings for improved smoothness
Factory Team VTS (Variable Torque multi-plate Slipper) with three drive surfaces and high-resolution spring
New transmission has stronger gears, precision ball bearings, and a 14 carbide ball differential for increased life and torque capacity
Adjustable front suspension mount angle (kick-up) options of 25 deg. and 30 deg.
New gull wing front suspension features heavy-duty steering and caster blocks, while the insert system allows for easy caster and trailing axle adjustments
One-piece front axle/hex adapter and larger front wheel bearing for added durability
Updated full bearing steering system with horizontal ball studs for finer Ackermann adjustments
Heavy-duty ball cups and ball studs allow for maximum suspension travel while reducing binding and friction
Rear hubs feature larger bearings as well as the quick and easy insert system to adjust camber link position and rear toe-in
B5M clear body and wing included




Required to Complete
1:10 scale 540 size electric motor
1:10 scale electronic speed control
7.4V LiPo or 6.6V LiFe battery (saddle pack, shorty pack, or square pack)
Battery charger (able to charge one of the batteries mentioned above)
2-channel surface transmitter, and its batteries
2-channel receiver
Steering servo
Pinion gear (48 pitch)
Polycarbonate-specific spray paint for body
1:10 scale buggy tires for 2.2" wheels
Glue for tires and wheels

As promised, I've found a little bit of time to do[…]

Nitro Tuning Guide

well a lot of the posts on here are for tuning. A […]

Getting Started

The Five Main Types Of Radio Controlled Helicopter[…]

"What's the best RC helicopter for kids o[…]

GOLD AWARD WINNER Pro Boat Recoil 66558-pro-bo[…]

2.4 GHZ RADIO TRANSMITTER SHOOTOUT

We get a lot of email here at the Big Squid RC off[…]

It's so amazing I’ve seen snowmobile’[…]

RCA15.jpg 1.jpg 2.jpg 3.jpg 4.jpg […]


Advertisements by Advertisement Management

{}