This is a the Sanwa Super Vortex ZERO Competition Brushless Electronic Speed Control. The Super Vortex ZERO ESC was designed for competition from the ground up. With almost unmeasurable resistance, huge current handling and advance programming features, this competition ESC is the top of its class. The Super Vortex ZERO ESC is compatible with all modern 2.4G radios and receivers.
What is Sanwa Synchronized Link?
When used with an Sanwa M12 or MT-4S and an RX-472 2.4G FH4T Super Response 4-channel receiver and the Sanwa Super Vortex ZERO ESC, the Sanwa Synchronized Link (SSL) system allows you to change many ESC programming values directly from the transmitter using the transmitter's CODE AUX function. This saves you the time and hassle of stopping to change programming values manually through the ESC. You can make these changes remotely and in higher resolution increments for improved performance. In addition, telemetry data such as speed or RPM, ESC temperature, motor temperature (if supported), and battery voltage can be read directly from the Super Vortex ZERO ESC and displayed on the transmitter.
Brushless Sensored Design with Custom Sanwa ESC Programming
Twelve Programming Modes
Thermal Overload Protection Circuit
Compatible with Normal, SHR, and SSR Channel Modes
Supports Remote Programming via the Transmitter (SSL Supported ONLY)
Input Power (Cells): 1S or 2S LiPo (4-6C N-MH)
Motor Limit: 3.5T with 1S or 4.5T with 2S LiPo
On Resistance: 0.00038 Ohms
Rated Current: 740 Amps/Phase
Dimensions: 1.25x1.39x.77” (32x35.5x19.7mm)
Weight: 42g (Excluding Wiring and Power Capacitor)
Super Vortex Zero Competition ESC
Cooling Fan w/Mounting Screws
3 Feet 12AWG Flexible silicone Wire