Forum Logo Rc Vehicles Forum

RC helicopters, FPV, Multirotors, RC boats and RC cars hobby - RC forums

Hello Everybody,

We are looking 2 admin for 2 forum :

One for the Aircraft Shed (All about aircrafts)
One for the Boats Harbor (Rc race boats and sailboats)
If you say YES i can do it , you can leave a message in the admin dialog box
 
Nicads, Nickel Metal Hydride, Lithium, LiPoly, Chargers, Cyclers, etc...
#2495
[align=center][attachment=0]B606AC-06.jpg[/attachment][/align]



Imax RC B606 AC PRO Special feature



Imax rc B606AC PRO employs an advanced charging calculation and design which allow multilayer error to be compatible. It can create a safe charging condition and maximum reduce the danger caused by negligence or setting error of user. It adopts prevalent Synchronous buck & boost converter technology, this makes conversion efficiency up to 90%. It accepts all types of R/C batteries: LiPo, Li-ion, LiFe, NiMH, NiCd, Pb.During the process, it can monitor and balance each cell of the pack individually (Tolerance: +_0.01V). This charger employs an individual-cell-voltage balancer to maintain you pack in balance while charging/discharging.



Individual battery charging/discharging and various charging mode



It accepts individual battery charging/discharging, so you can extend the scope of application of the charger. That is equally useful for the DIY battery. Various of charging mode to meet different demand: charging-auto/balance charging/fast charging/storage and cyclic charging etc.



Simple & efficient user interface



The user interface makes operation easy, with powerful function and abundant content. Real-time shows you the battery voltage, charger current, temperature of batteries, capacity of charge/discharger, elapsed time, input voltage etc., therefore, you can inquire the present state and establish various safety-limited parameters conveniently.



Five data of batteries and 1-5 cycles



For users convenience it can store and load maximum five data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. Three data can be called out at any time you need and the process can be executed without program setting. Perform 1-5 cycles of charge>discharge or discharge>charge continually for NiMH/NiCd refreshing.



Specification



Input voltage: 11-18V DC 100-240V AC

Charge power: max. 80W

Discharge power: max. 10W

Charge current range: 0.1-6.0A

Discharge current range: 0.1-1.2A

Current drain for balancing LiPo: 300mAh/cell

Balance tolerance: 0.01V

NiCd/NiMH battery cell count: 1-18 cells

LiPo/LiIo/LiFe battery cell count: 1-6 series

Pb battery voltage: 2V-24V

Temperature sensor port: YES

Dimension: 147mm X 145mm X 56mm

Weight: 980g
Attachments
B606AC-06.jpg

As promised, I've found a little bit of time to do[…]

Nitro Tuning Guide

well a lot of the posts on here are for tuning. A […]

Getting Started

The Five Main Types Of Radio Controlled Helicopter[…]

"What's the best RC helicopter for kids o[…]

GOLD AWARD WINNER Pro Boat Recoil 66558-pro-bo[…]

2.4 GHZ RADIO TRANSMITTER SHOOTOUT

We get a lot of email here at the Big Squid RC off[…]

It's so amazing I’ve seen snowmobile’[…]

RCA15.jpg 1.jpg 2.jpg 3.jpg 4.jpg […]


Advertisements by Advertisement Management

{}